Ваш браузер устарел.

Для того, чтобы использовать все возможности сайта, загрузите и установите один из этих браузеров.

скрыть

Article

  • Title

    REDUCING THE RELIABILITY OF EQUIPMENT AS A RESULT OF THE REDUCTION OF THE CULTURE OF PRODUCTION

  • Authors

    Sydorenko Igor I.
    Kravtsov E. D.
    Prokopovich Igor V.
    Korolkova M.
    Dmitrieva S.

  • Subject

    MACHINE BUILDING. PROCESS METALLURGY. MATERIALS SCIENCE

  • Year 2019
    Issue 3(59)
    UDC 621.86.078.62
    DOI 10.15276/opu.3.59.2019.01
    Pages 5-13
  • Abstract

    The study investigates the causes of breakdown of the supporting structure (frame) and transmission elements of the vibratory conveyor, developed by “Sigurd” CJSC (Odessa) and is in operation at one of the enterprises of Ukraine. In result of the studies, the places and nature of destruction were identified, as well as the force factors causing these destructions were calculated. The calculations were carried out at the basis of a calculation scheme compiled by the geometric parameters of the destructible elements of the supporting structure and the permissi-ble stresses for their materials. The calculations were reduced to determining the ultimate forces leading to the destruction of the element and assembly, and their comparison with the effort developed by the transmission. In addition, an analysis of the kinematics and dynamics of the vibration conveyor was made, for which its three-dimensional computer model was developed. Studies were conducted on its basis. The calculations and analysis showed that the cause of the destruction of structural elements was a violation in the kinematics of the device. It was found that there were no errors at the stages of designing and manufacturing of this equipment, and problems arose during assembly and installation, as the basic geometry requirements of both the units of the device and their connection points were not fulfilled. An expert assessment concluded that the enterprise has a low production culture and, as a consequence, a poor quality organization of the production process. There is no interaction between the units performing the work; there is no proper control over the contractors, as well as the necessary qualifications of the engineering and technical personnel. The developed set of measures, which includes the design, manufacture and use of measuring (calibration) tools and equipment, along with staff training, made it possible to rectify the current situation and get efficient equipment.

  • Keywords vibration conveyor, kinematic characteristics, excessive communication, self-locking effect, production culture
  • Viewed: 117 Dowloaded: 3
  • Download Article
  • References

    Література

    1. Александров М.П. Грузоподъёмные машины. Москва : Изд-во МГТУ им. Н.Э. Баумана. Высшая школа, 2000. 552 с.

    2. Ивашков И.И. Монтаж, эксплуатация и ремонт подъемно-транспортных машин. Москва : Маши-ностроение, 1991. 400 с.

    3. Металлические конструкции. В 3-х т. Т. 1. Элементы конструкций / В.В. Горев., Б.Ю. Уваров, В.В. Филиппов и др.; Под ред. В.В. Горева. 2-е изд., перераб. и доп. Москва : Высш. Шк., 2001. 551 с.

    4. Волков Д. П. Строительные машины и средства малой механизации. Москва : Мастерство, 2002. 480 с.

    5. Иванченко Ф. К. Конструкция и расчёт подъёмно-транспортных машин. 2-е изд. перераб. и доп. Киев : Выща шк. Головное изд-во, 1988. 424 с.

    6. Лепеш Г.В., Куртов В.Н., Мотылев Н.Г. Оперативный контроль и диагностика оборудования. Технико – технологические проблеммы сервиса. 2009. №3(9). С. 8–16.

    7. Конвейеры: Справочник / Р.А. Волков, А.Н. Гнутов, В.К. Дьячков и др, Под общ. ред. Ю.А. Пер-тена. Ленинград : Машиностроение, 1984. 367 с.

    8. Hoeppner D. W. Industrial Significance of Fatigue Problems. In Fatigue and Fracture. 2005. Vol. 19. P. 47–58.

    9. Dyr T. Model Particle Velocity on a Vibrating Surface. Physicochemical Problems of Mineral Process-ing. 2002. Vol. 36. P. 147–157.

    10. Кіницький Я.Т. Теорія механізмів і машин. Київ : Наукова думка, 2002. 660 с. ISBN 966-00-0740-Х. 11. Бучинський М.Я., Основи творення машин. Харків : Вид-во «НТМТ», 2017. 448 с. ISBN 978-966-2989-39-7.

     

    References

    1. Alexandrov, M.P. (2000). Hoisting machines. Moscow: Publishing house of MGTU im. N.E. Bauman, “Visshaya shkola”.

    2. Ivashkov, I.I. (1991). Installation, operation and repair of hoisting-and-transport machines. Moscow: Mashinostroenie.

    3. Gorev, V.V., Uvarov, B.Yu., & Filippov V.V., et al. (2001). Metal structures. In 3 vols. T. 1. Elements of structures. V.V. Grief. (Ed.). Revised. and add. Moscow: Vissh. shk.

    4. Volkov, D.P. (2002). Construction machinery and means of small mechanization. Moscow: Masterstvo.

    5. Ivanchenko, F.K. (1988). Design and calculation of hoisting-and-transport machines. 2nd ed. reslave. and add. Kyiv: Visha shk. Golovnoe izd-vo.

    6. Lepesh, G.V. (2009). Operational control and equipment diagnostics. Technical and technological problems of service, 3, 8–16.

    7. Volkov, R.A., Gnutov, A.N, & Dyachkov, V.K. at el. (1984). Conveyors: Reference book. Yu.A. Perten (Ed.). Leningrad: Mashinostroenie.

    8. Hoeppner, D.W. (2005). Industrial Significance of Fatigue Problems. In Fatigue and Fracture, 19, 47–58.

    9. Dyr, T. (2002). Model Particle Velocity on a Vibrating Surface. Physicochemical Problems of Mineral Processing, 36, 147–157.

    10. Kinitsky, J.T. (2002). Theory of mechanisms and machines. Kyiv: Naukova dumka, ISBN 966-00-0740-X. 11. Buchinsky, M. (2017). Fundamentals of machine creation. Kharkiv: NTMT Edition, ISBN 978-966-2989-39-7.

  • Creative Commons License by Author(s)