Ваш браузер устарел.

Для того, чтобы использовать все возможности сайта, загрузите и установите один из этих браузеров.

скрыть

Article

  • Title

    Forming of normative requirements for matrix assessment of manufacturing machine-building products quality

  • Authors

    Vanko V.
    Prikhodko O.

  • Subject

    METROLOGY, STANDARDIZATION AND CERTIFICATION

  • Year 2018
    Issue 2(55)
    UDC 658.562; 621.983.073
    DOI 10.15276/opu.2.55.2018.11
    Pages 97-104
  • Abstract

     

    Based on the requirements of current normative documents, the structure of system management of engineering
    production quality is substantiated in the form of four integrated systems, which characterize all stages of the product life cycle. In order to improve the functioning of this system, there is proposed a combination of matrix method of products and services quality evaluation and risk analysis through different types and consequences of potential customer’s failures (FMEA). Since the main attention is paid to the groups of design, training and production processes and, taking into account the specifics of the implementation of the proposed technique for assessing the quality of processes and procedures, the main aspect is regarded to be the formation of partial standard quality matrices. It is firstly emphasized on the specifics and conditions of creation of the examined partial matrices of quality by organizing expert meetings.
    During these meetings, the packages of partial standard matrices are also formed. A general approach is proposed for their execution by choosing the appropriate values concerning the elements of partial standard matrices, based on the recommended range of values. As an example, there is considered the analysis of the main production processes related to the production of sleeve AL 0908.3012.2017 of the cylinder of internal combustion engines SMD-14 which are installed in tractors and combine harvesters. The formation of partial investigated and standard matrices for processes of casting blanks is described: input control, preparation of batches, manufacturing of sleeve blanks and Праці Одеського політехнічного університету, manufacturing and testing of samples. The similar quality matrices are presented, which characterize mechanical processing of cylinder sleeve blanks: initial processing, final processing and output control. On the basis of multiple data presented in production, there is conducted the analysis of potential risks at the investigated stages of a life cycle of cylinder sleeves, which may lead to deterioration in quality of these sleeves and, accordingly, to failures of the specified agrarian machinery. The way to improve the normative documents on production
    technology in the form of new documents for conducting production meetings of leading specialists is proposed. This will ensure the improvement of the quality management system of machine-building production, the efficient operation of its production sites and the improvement of the competitiveness of products.

  • Keywords quality management system, FMEA-analysis, priority number of risk, quality scores, partial quality matrix, partial reference matrix, cylinder sleeve
  • Viewed: 59 Dowloaded: 0
  • Download Article
  • References

     

    1. ISO 9001-2015. Системи управління якістю. Вимоги. [Чинний від 01.07.2016]. Київ: ДП
    УкрНДНЦ, 2016. 27 с.
    2. ISO 9004-2012. Управління задля досягнення сталого успіху організації. Підхід на основі
    управління якістю. [Чинний від 01.05.2013]. Київ: ДП УкрНДНЦ, 2012. 52с.
    3. Эванс Д.Р. Управление качеством / Пер. с англ. Под. ред. Э.М. Короткова. Москва : ЮНИТИ
    ДАНА, 2007. 671 с.
    4. Кане М.М., Иванов Б.В., Корешков В.Н., Схиртладзе А.Г. Системы, методы и инструменты
    менеджмента качества: учеб. пособ. СПб.: Питер, 2008, 560 с.
    5. Харрингтон Дж. Управление качеством в американских корпорациях. Москва : Экономика, 1990.
    272 с.
    6. Тито Конти, Есио Кондо, Грегори Ватсон. Качество в XXI веке. Роль качества в обеспечении
    конкурентоспособности и устойчивого развития/ Пер. с англ. Москва : Стандарты и качество,
    2004. 280 с.
    7. Тріщ Р.М., Янушкевич Д.А., Москаленко М.В., Малецька О.Є. Метрологія та стандартизація:
    навч. посіб. Харків : Щедра садиба плюс, 2014. 443 с.
    8. Ванько В.М., Приходько О.М. Матричний метод проведення FMEA-аналізу як інструмент
    прогнозування якості продукції. Вимірювальна техніка та метрологія. 2017. №78. С. 80–84.
    9. Ванько В.М., Приходько О.М. Вдосконалення системи управління якістю виробництва
    машинобудівної продукції. Праці Одеського політехнічного університету. 2018. 1(54). С. 108–114.
    DOI: 10.15276/opu.1.54.2018.15.
    10. ІЕС 60812:2006. Analysis techniques for system reliability – Procedure for failure mode and effects
    analysis (FMEA).
    11. Панюков Д.И., Скрипачев А.В. Инженерные методы управления качеством. Анализ видов, причин и
    последствий потенциальных дефектов (FMEA): учеб. пособ. Тольятти : ТГУ, 2007. 133 с.
    12. Манин Ю.И. Лекции по математической логике. Части 1 и 2: сов. учеб. лит-ра для ВУЗ. Москва,
    1974. 204 с.
     


    1. Quality management systems. Requirements. (2016). ISO 9001-2015 from 1st July 2016. Kyiv: DP
    UkrNDNC.
    2. Managing for the sustained success of an organization. A quality management approach. (2012). ISO
    9004-2012 from 1st May 2013. Kyiv: DP UkrNDNC.
    3. Evans, D.R. (2007). Total quality. Management, organization and strategy. Moscow : UNITY DANA.
    4. Kane, M.M., Ivanov, B.V., Koreshkov, V.N., & Shirtladze, A.G. (2008). Systems, methods and tools of
    quality management. St. Petersburg: Allowance.
    5. Harrington, H.J. (1987). The Improvement Process how America’s leading Companies improve quality.
    Wisconsin, USA.
    6. Tito Konti, Yesio Condo, & Gregory Watson. (2014). Quality into the 21st Century: Perspectives on
    Quality and Competitiveness for Sustained Performance. Moscow : Standards and quality.
    7. Trish, R.М., Yanushkevich, D.A., Moskalenko ,M.V., & Maletska, O.E. (2014). Metrology and
    Standardization. Kharkiv: Generous Estate Plus.
    8. Vanko, V.M., & Prikhodko, O.M. (2017). Matrix method for FMEA-analysis realization as a tool for
    predicting product quality. Measuring technology and metrology. 78, 80–84
    9. Vanko, V.M., & Prikhodko, O.M. (2018). Improvement of the quality management system of the
    machine-building production. Proceedings of Odessa Polytechnic University, 1(54), 108–114. DOI:
    10.15276/opu.1.54.2018.15.
    10. ІЕС 60812:2006. Analysis techniques for system reliability – Procedure for failure mode and effects
    analysis (FMEA).
    11. Panyukov, D.I., & Skripachov, A.V. (2007). Engineering methods of quality management. Analysis of
    types, causes and consequences of potential defects (FMEA). Tolyatti : TSU.
    12. Manin, Yu.I (1974). Lectures on Math logic. Parts 1 and 2. Moscow.

  • Creative Commons License by Author(s)