Ваш браузер устарел.

Для того, чтобы использовать все возможности сайта, загрузите и установите один из этих браузеров.

скрыть

Article

  • Title

    Deformation-strength model application at the determining of stress-strain state of reinforced concrete structures

  • Authors

    Karpiuk V. M.
    Kostiuk А. І.
    Somina Ya. А.
    Danilenko D. S.

  • Subject

    MACHINE BUILDING. PROCESS METALLURGY. MATERIALS SCIENCE

  • Year 2017
    Issue 2(52)
    UDC 624.012.25
    DOI 10.15276/opu.2.52.2017.03
    Pages 18-23
  • Abstract The work considers the possibility and expediency of deformation-strength model applica-tion in the study of stress-strain state of reinforced concrete structures. Relying on the basic provisions of the mechanics of solid deformable body and the real stages of work of reinforced concrete elements, it is generalized and established by the authors that the real state of rein-forced concrete structures cannot only be described by stresses diagrams or only by strain diagram. Aim of the paper is consideration of concrete and reinforced concrete elements’ work as a force and deformation model. The theory of reinforced concrete structures resistance, as before, is aimed at a precise definition of the four major problems: accurate calculation of the load at which the first cracks appear; deter-mination of the width of the cracks in the operational phase, starting from the moment of their appearance; calculation of rigidity and deflec-tions, including the maximum permissible; definition of maximum possible bearing capacity (strength or stability). The real state of the rein-forced concrete structure cannot be displayed only by stress distribution or deformations diagrams. This can only be done when used in con-junction with both diagrams. In this case, the generalized model of the element deformation should be able to equally reflect both the nature of the growth of relative deformation of materials, and a process of continuous redistribution of stresses in them, especially at the stages that are close to the limit equilibrium.
  • Keywords reinforced concrete element, stress-strain state, deformation-strength model, diagram
  • Viewed: 191 Dowloaded: 3
  • Download Article
  • References

    1. Мурашев, В.И. Трещиноустойчивость, жесткость и прочность железобетона / В.И. Мурашев. – М.: Машстройиздат, 1950. – 268 с.

    2. СНиП 2.03.01-84* Бетонные и железобетонные конструкции: нормы проектирования. – М.: Госстрой СССР, 1989. – 80 с.

    3. Ромашко, В.М. Деформаційно-силова модель опору бетону та залізобетону: Монографія // В.М. Ромашко. – Рівне: 2016. – 424 с.

    4. Чистяков, Е.А. О деформативности бетона при внецентренном сжатии железобетонных элементов / Е.А. Чистяков // Прочность, жёсткость и трещиностойкость железобетонных конструкций: труды НИИЖБ. − М.: Стройиздат, 1979. − С. 108 – 125.

    5. ACI Committee 440. Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars: ACI 440.1R-06. − ACI, Farmington Hills, Michigan, 2006. − 44 p. − (Стандарт США).

    6. Almusallam, T.H. Stress-strain relationship of normal, hight and lightweight concrete / T.H. Almusallam, S.H. Alsayed// Magazine of Concrete Research, Vol. 47, № 170, 1995. − P. 39 – 44.

    7. B. A. E. L. 91: règles techniques de conception etde calcul des ouvrages et constructions en béton armé, suivant la méthode des états limites. − Paris: Eyrolles, 1992. − 308 p. − (Стандарт Франції).

    8. Çiftci, G. K. Nonlinear analysis of reinforced concrete frame structures: in Partial Fulfillment of the Requirements for the Degree of Master of Science in Civil Engineering / GU9IU KorayCiffci. − January 2013. − 57 p.

    9. DIN 1045-1: 2008-08. Tragwerke aus Beton, Stahlbeton und Spannbeton. Teil 1: Bemessung und Konstruktion: − Berlin: Beuth Verlag GmbH, 2008. − 178 s. − (Стандарт Німеччини).

    10. NEN 6720:1995nl. TGB 1990 – Voorschriften Beton − Constructieveeisen enrekenmethoden (VBC 1995). – Nederlands Normalisatie-instituut, 1995. − 245 p. − (Стандарт Нідерландів).

    11. Shah, S.P. Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and Other Quasi-Brittle Materials / S.P. Shah, S.E. Swartz, C. Quyang. − John Wiley & Sons, New York, 1995. − 552 p.

  • Creative Commons License by Author(s)